Washer leaking? Won't spin? Error codes flashing? We repair front-load and top-load washers from Samsung, LG, Maytag, Whirlpool, and all brands. Next-day service, OEM parts, 3-month warranty.
A broken washing machine can bring your household to a standstill. Dirty laundry piles up fast, especially with kids in the house. That's why we prioritize next-day washer repair across Metro Vancouver. Our technicians have seen every washer problem imaginable — from door seal leaks on front-loaders to agitator failures on top-loaders — and we fix them right the first time.
Burnaby has a huge range of housing — from towers around Metrotown and Brentwood to older ranchers in Burnaby Heights. We're familiar with the appliance setups in all of them, including the stacked washer/dryers common in newer condos.
Front-load washers are the most common type in Metro Vancouver homes, and they come with their own set of issues. Door boot seal tears cause leaks, drum bearings wear out and create loud grinding noises, and drain pumps get clogged with coins and hair ties. Top-load washers tend to have different problems — lid switch failures, agitator dogs wearing out, and transmission issues. Whether your Samsung front-loader is throwing an error code or your Maytag top-loader won't drain, we have the parts and experience to get it running.
Washer repairs generally range from $150 to $400. A door latch or drain pump fix is typically under $250, while bearing replacements and motor repairs cost more. We use genuine OEM parts and back every repair with a 3-month warranty on both parts and labour.
We provide next-day washer repair across all Burnaby neighbourhoods, including Metrotown, Brentwood, Edmonds, Burnaby Heights, and Burnaby Mountain. No matter where you are, we'll give you a real arrival window — not an all-day wait.
Call before noon — we'll usually be at your Burnaby home the same afternoon.
Parts and labour covered. If it breaks again, we come back free.
Full quote before any work starts. Diagnostic fee credited toward repair.
Genuine manufacturer parts — not cheap knockoffs that fail again.
Common causes include a failed lid switch (top-load), door latch (front-load), worn drive belt, or a motor coupling issue. On newer electronic models, it could also be a control board problem.
Burnaby is right next to our Coquitlam base — most Burnaby locations are 15-20 minutes away. Next-day service is almost always available.
Front-loader leaks are usually caused by a torn door boot seal, clogged drain pump, or a loose hose connection. Door boot seals wear out over time and are one of our most common washer repairs.
Yes, constantly. These are some of our busiest service areas. We're very familiar with the compact appliance configurations in Burnaby's newer high-rises.
Mold grows in the door boot seal and detergent drawer when moisture gets trapped. We can deep clean the seal or replace it if the mold damage is severe. We'll also show you how to prevent it.
Yes, a standard diagnostic fee applies. If you proceed with the repair, the full fee is credited toward your total cost — so you only pay for the fix.
Excessive vibration is usually caused by worn shock absorbers or suspension springs, an unbalanced load sensor, or leveling problems. On older top-loaders, worn tub bearings are often the cause.
Every repair comes with our 3-month parts and labour warranty, regardless of location. If the same issue comes back, we return and fix it at no extra cost.
Call us at (604) 265 3565 or send a request. Next-day service available across Metro Vancouver.